Hoppa till huvudinnehåll

6030-100

Fireray Hub Reflective - Detector
  • Offers laser-assisted, motorised Auto-Alignment™ from the system controller, with manual alignment as an option if needed
  • 2-wire interface from detector to system controller offers an installation with 60% less wiring and in 25% less time using network mode
  • Compensates for natural shifts in alignment from building movement
  • Compensates for gradual build-up of contamination on the optical surfaces
  • Compensates for high levels of sunlight and artificial lighting
Se alla

På kartan

General

The Fireray Hub Reflective Detector is an additional beam detector head for use the the Fireray Hub Reflective System. Connection of up to 3 Fireray Reflective Detectors can be accommodated on a single cable run to the hub, making the installation extremely easy and flexible.

Benefits

It supports modern, reflective motorised beam technology that facilitates:
• Auto-Alignment™
Using the Hub, direct the laser onto the prism and with the press of a button, it aligns itself.
• Building Movement Tracking™
Keeping the beam aligned even if the building moves, preventing unwanted alarms and faults
• Light Cancellation Technology™
Prevent nuisance alarms by compensating for sunlight and artificial light sources

Detaljer

  • Offers laser-assisted, motorised Auto-Alignment™ from the system controller, with manual alignment as an option if needed
  • 2-wire interface from detector to system controller offers an installation with 60% less wiring and in 25% less time using network mode
  • Compensates for natural shifts in alignment from building movement
  • Compensates for gradual build-up of contamination on the optical surfaces
  • Compensates for high levels of sunlight and artificial lighting
  • Dynamic beam phasing allowing beam detectors to be mounted facing each other with the reflectors in the middle
  • Operate in dusty or wet environments due to the high enclosure integrity of the detector

Tekniska specifikationer

General
Compatibility
6020-100 Fireray Hub Reflective
Connectivity
2-wire & screen
Addressing method
DIP Switches
Electrical
Power supply type
Loop powered
Operating voltage
14 to 36 VDC
Cable specification
24 to 14 AWG (0.5 to 1.6 mm) ( 1/100" to 6/100")
No. of cable cores
2, dedicated
Detection
Detection principle
Optical infrared beam
Zone length
< 100 m from the hub
Range
8 to 50 m (to 120 m with FD-LRK)
Optical wave length
850 nm
Adjustment angle
± 4.5°
Misalignment tolerance
± 0.5°
Beam path clearance 0.5 m (1¾ ft) radius from centre line between detector and reflector
Response time < 2 s
Physical
Physical dimensions
Detector: 131 x 134 x 131 mm (H x W x D)
Reflector: 100 x 100 x 9 mm (H x W x D)
Net weight
Detector: 0.57 kg
Reflector: 0.06 kg
Mounting type
Hinged mouting
Surface mount
Environmental
Vandal proof
No
Operating temperature
-10 to +55°C (+14 to +131ºF)
Storage temperature
-40 to +85°C (-40 to +185ºF)
Relative humidity
0 to 93% non condensing or icing
Environment
Indoor
IP rating
IP55
Regulatory
Compliancy
CE
REACH
RoHS 3
UKCA
WEEE
Certification
CPR
Voluntary marks
VdS
Standards
EN54-12